lfsuffix = rohs compliant. all specificat ions are subject to change without notice. ? z-communications, inc. all rights reserved. page 1 of 2 frm-s-002 b phase noise (1 hz bw, typical) offset (hz) (f) (dbc/hz) performance specifications typ units min max 42 -100 -18 1 5 50 50 oscillation frequency range phase noise @ 10 khz offset (1 hz bw) harmonic suppression (2nd) tuning voltage tuning sensitivity (avg.) power output load impedance input capacitance pushing pulling ( db return loss, any phase) operating temperature range mhz dbc/hz dbc vdc mhz/v dbm pf mhz/v mhz c 1507 1685 14 0.5 4.5 package style -2 5 70 -20 1.5 -17 power supply requirements typ units min max 5 20 vdc ma supply voltage (vcc, nom.) supply current (icc) 24 pin 4, mod port is not used and could be connected to ground. wimax mobile communication systems ? ? ? applications voltage-controlled oscillator surface mount module clv1596a-lf b2 rev additional notes application notes ? an-101: mounting and grounding ? an-102: output loading ? an-107: manual soldering 14118 stowe drive, suite b | poway, ca 92064 tel: (858) 621-2700 | fax: (858) 486-1927 url: www.zcomm.com email: applications@zcomm.com mini-14ms
tuning curve, typ. 1420 1440 1460 1480 1500 1520 1540 1560 1580 1600 1620 1640 1660 1680 1700 1720 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 c c c tuning voltage (vdc) frequency (mhz) power curve, typ. footprint voltage-controlled oscillator surface mount module clv1596a-lf b2 rev power output (dbm) 0.030 min. cutback from live pads recommended footprint several holes of 0.015 on gnd. plane are recommended for good grounding. o c c c lfsuffix = rohs compliant. all specificat ions are subject to change without notice. ? z-communications, inc. all rights reserved. page 2 of 2 frm-s-002 b -20 70 25 -20 70 25 -2 -1 0 1 2 3 4 5 6 7 8 1446 1482 1512 1540 1566 1593 1620 1645 1669 1691 frequency (mhz) physical dimensions z-comm xxxxxxxx-lf w/o# d/c p1 vt p2 rf out p3 vcc pin configuration p4 mod rest ground package mini-14ms mini-14ms-low h 0.220 0.160 note: all dimensions are in inches t ol: xxx: +/- 0.010
|
